Vegetable and Fruit Washing Machine

Description of vegetable and fruit washing machine:

The effects of vegetable cleaning equipment and household fruit and vegetable cleaning machines are similar in principle. Cleaning is very important in vegetable processing. The washed vegetables may be the final product or the primary product in the deep processing of vegetables. The cleaning operation is very important to the quality of the processed vegetable products. Vegetables can be cleaned to remove surface dirt, microorganisms and pesticide residues. Before cleaning, the number of microorganisms on the surface of the vegetables is between 104 and 108g. Some leafy and root vegetables have a higher number of microorganisms due to adhesion to the soil. Through the correct cleaning process, the number of microorganisms will be reduced to about 2.5% to 5% of the initial number. The effect of vegetable cleaning depends on the influence of factors such as cleaning time, cleaning temperature, mechanical force action, and the pH value, hardness and mineral content of the cleaning liquid. In addition to washing vegetables by mechanical force, adding surface active substances or cleaning agents can also greatly improve the cleaning effect.

Technical information of vegetable and fruit washing machine:

The scope of application of fruit and vegetable washing machine:

Suitable for roots, leafy vegetables and other peppers, greens, ginger, etc., apples, pears, plums, plums, grapes, hawthorn, red dates, green plums, sand fruits, strawberries, etc., platycodon, asarum, gastrodia, planted ginseng, etc. Material cleaning, impurity removal and transportation. He replaced heavy labor and realized the mechanization of agricultural products.

Working principle of fruit and vegetable washing machine:

The water is tumbling and "boiling" through the high-pressure cyclone pump, so that the dust and sand on the surface of the material are quickly separated from the main body, and the cleaned material is input to the next process through the stainless steel mesh belt. There are multiple installations on the upper part of the discharge end. The fan-shaped nozzle cleans the vegetables twice to achieve a good cleaning effect.

The whole is made of high-quality stainless steel, and the user can adjust the speed of the mesh belt at will according to the process requirements, so that the objects to be cleaned can be thoroughly cleaned.

Operation steps of fruit and vegetable washing machine:

(1) Clean the water tank and fill it with water; fill the main tank with clean water until there is water overflow at the overflow.

(2) Start the conveyor mesh belt motor to make the mesh belt run normally and in the correct direction;

(3) Start the vortex pump and inject air into the water tank to make the water in the tank churn;

(4) Open the valve of the spray pipe to spray the water evenly on the mesh belt;

(5) Check all operating parts and work after confirming normal operation.

(6) Depending on the cleaning degree of the material, it can be cleaned separately and then transported by the mesh belt.

Maintenance knowledge of fruit and vegetable washing machine:

Our users who use washing machines know that the maintenance of equipment is particularly important. Moreover, the normal maintenance of the machine can greatly exert the service life of the equipment. It can be said that maintenance is essential for the machine. Regarding what is the correct repair and maintenance,here are some suggestion as follows:

1. It is the adjustment of the chain. The adjustment is carried out after the motor stops. Press the chain with your fingers in the middle of the two sprockets. The compression is generally between 4 and 9 mm, which is the standard value. Once it exceeds the standard value Just adjust the idler to the specified tightness.

2. For CVT replacement, refueling and replacement of CVT gearbox oil, firstly stop the motor, and it is strictly forbidden to remove the oil check plug under the condition of fire and smoke. The oil just flows out to the appropriate amount, when it is insufficient Add it.

3. Adjust the belt. When the motor stops, in the middle of the two pulleys, press the belt with your fingers (middle finger and index finger) to compress the belt to 7~12mm as the standard value. When it is greater than the standard value, adjust the idler to the specified tightness.

4. When we want to store for a long time without using, we can wash and wipe the various parts of the soil and other objects, and all the rotating parts, belts, chains and other attached debris must be complete and rotated. The parts and friction active parts are fully oiled to prevent the appearance of rust.

http://www.lffoodmachine.com/